Description
Sticker Application Kit.
Squeegee & Application fluid.
1 x “sticker application Kit”
USE:
Clean the area of application of all dirt and grime.
Spray the application fluid on Both the sticky side of the sticker and on the application area.
Apply the sticker in the correct spot, once you have done this, use the squeegee to carefully squeegee the fluid out form underneath the sticker. Its recommended to begin with less pressure on the squeegee and slowly apply more pressure.
Once done, peel away the application tape and your sticker is ready to go.
NOTE: The purpose of the application spray is to help squeegee all the bubbles out from in-between the vinyl sticker and the application surface.
The application spray will also help if you need to pull the sticker off from your application area as maybe you have to change its position. However, if you have the used the squeegee just once, or applied a tiny amount of pressure on the sticker then this will cause strong adhesion and has maybe gone past the point of being able to pull the stickers off for re-application.
Included:
1 x Plastic squeegee. Perfectly designed to help a smooth application of the sticker.
1 x re-usable Bottle of premium grade application fluid, this helps to temporarily retard the adhesive on the vinyl allowing for bubble free application, and allowing you to manipulate the sticker with out it sticker until pressure has pushed out the application fluid.
NOTE:
Application Fluid is hazardous to health. Care must be taken when using.
Reviews
There are no reviews yet.